How to Wear Romantea Bubbly Candy Purple Hyperopia Contacts

By Buy Colored Contacts for Brown & Grey | LENSTOWNUS | Published: 2026-11-02

Category: How-to Guides

A step-by-step guide to inserting, centering, and caring for Romantea Bubbly Candy Purple Hyperopia lenses, with practical checks for plus-power wear.

Quick answer

Wear Romantea Bubbly Candy Purple Hyperopia lenses only with a current prescription, and build a repeatable routine: wash and dry your hands, check the lens for damage and correct orientation, insert with the graphic side out, center it, then clean and store it in fresh solution after each wear.

Why plus-power lenses need a slightly different insertion check

Hyperopia lenses correct farsightedness, so the prescription is part of the lens itself. That means the fit and the optical center matter more than with a simple cosmetic lens. If the lens sits off-center or is inserted inside out, vision can feel blurry or uncomfortable even when the prescription is correct.

Romantea Bubbly Candy Purple Hyperopia has a 14.2mm total diameter and a 13.9mm graphic diameter, so the colored zone covers most of the lens. A small decentration is more noticeable than with a smaller graphic, which is why the centering step below is worth doing slowly.

When this lens is not the right choice

This is a hyperopia-only lens, so it is not suitable if you need correction for myopia or astigmatism. It is also a 6-month replacement lens, which means you need a cleaning and storage routine you can keep up with. If you prefer daily disposables or cannot commit to regular disinfection, choose a shorter replacement cycle instead.

The 40% water content and silicone hydrogel material are supplied facts, but comfort still depends on your own eyes, your environment, and how well you clean the lenses. Stop wearing them and consult an eye care professional if you notice persistent redness, pain, or blurred vision.

Step-by-step: wearing Romantea Bubbly Candy Purple Hyperopia

Confirm your prescription and lens condition: Check that your prescription includes plus power for hyperopia and that the lens packaging is sealed and within its expiry date. Inspect the lens in the blister or case for tears, debris, or dried edges before use. Never wear a lens that looks damaged or has passed its expiry date, even if it has been stored correctly.
Wash and dry your hands: Wash with soap and water, rinse thoroughly, and dry with a lint-free towel. Avoid oily or scented soaps, which can leave a film on the lens. Dry hands matter: wet fingers make the lens slip and increase the chance of folding it.
Check orientation and place the lens on your fingertip: Place the lens on your clean, dry index finger. Look at the profile: the edge should curve inward like a bowl. If the edge flares outward like a saucer, the lens is inside out. For this lens, the graphic side should face away from your eye. If the lens will not sit comfortably or vision is blurry after insertion, remove it and recheck orientation before trying again.
Insert and center the lens: Hold your upper eyelid with one hand and pull down the lower lid with the other. Look straight ahead or slightly up, place the lens on the center of your eye, then release your lids slowly. Close your eye gently and roll it once to settle the lens. Do not squeeze your lids shut; that can fold the lens or push it off-center.
Check comfort and vision: Blink a few times and look at a distant object. The lens should feel comfortable within a minute or two and vision should be clear. If it feels gritty or vision is blurry, remove the lens, rinse it with fresh solution, and reinsert. Persistent discomfort or blur after reinsertion is a reason to stop wearing the lens and check with your eye care professional.
Remove, clean, and store after each wear: Wash and dry your hands again. Remove the lens by looking up, pulling the lower lid down, and sliding the lens down with your fingertip. Clean it with fresh multipurpose solution, rub gently, rinse, and place it in a clean case filled with fresh solution. Replace the solution daily. Never top off old solution or use tap water; both can introduce contamination.

Product facts that affect wear

Romantea Bubbly Candy Purple Hyperopia: Hyperopia-only design with plus power, 14.2mm total diameter, 13.9mm graphic diameter, 8.6mm base curve, 40% water content, silicone hydrogel, 6-month replacement. The plus-power correction is built into the lens, so you need a valid prescription and a careful centering check; the 6-month cycle means daily cleaning and storage matter.
Romantea Bubbly Candy Purple Hyperopia